Keramikfräser Swissceramill Goldline
LOGO-SWISSCERAMILL_BSQTECH

CERAMIC END MILL

CNC MILLING IN PRECIOUS METALS AND BRASS WITH SWISSCERAMILL GOLD LINE

The Swissceramill Gold Line ceramic cutters are excellent for milling precious metals such as gold and silver and for processing brass and lead-free brass. 
The wear and tear of the Swissceramill ceramic cutters is very low, so that a large series can be milled with one tool and the smallest tolerances and the finest surfaces can be achieved. These milling cutters are particularly popular in the jewelry and watchmaking industries.
The Swissceramill GOLD LINE ceramic cutters have also been developed to achieve higher productivity.
This technology is new worldwide and it is the first tool with which you can reduce the machining time through the high cutting speeds, feeds and infeeds.
With Swissceramill we are currently achieving an increase in productivity of 700%.

 
If you have questions and want to find out more, read themFAQfor more above  to experience this ceramic technology.

FOR US, EVERY SECOND COUNTS.

It is best to make an appointment and we will support you in increasing your productivity.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill_Goldline_D1.5mm

Swissceramill_Goldline_D1.5mm

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline D3mm

Swissceramill Goldline D3mm

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

Swissceramill Goldline

Swissceramill Goldline

Swissceramill Goldline Keramikfräser für die Bearbeitung von Edelmetallen und Inconell.

WITH SWISSCERAMILL YOU ENJOY THE FOLLOWING ADVANTAGES
 
Maximum precision in series production of less than 0.002mm dimensional accuracy
Maximum performance possible thanks to higher feed rates
Maximum tool life with at least 10x longer service life compared to carbide
Maximum surface quality at Ra 0.4 to Ra0.05 (as polished)
Maximum process stability, which is very stable for large series
New and unique technology worldwide
Higher performance than carbide tools
Easy to use and no additional knowledge required
Very sharp cutting edges ground and polished
No coating necessary
Regrinding service is guaranteed
Low spindle load up to 75% less than with carbide tools
 

Technical ceramics makes it possible

Swissceramill Goldline D1mm

NEW REVOLUTIONARY TECHNOLOGY IN MILLING

FASTER MILLING - SAVE MORE TIME - LONGER DURABILITY - HIGHER QUALITY

SWISSCERAMILL - CERAMIC MILL

Thanks to a special ceramic material based on SIALON and special grinding processes, we are now able to increase service life compared to hard metals by at least 10x and productivity by 400%.

Numerous customer tests prove it impressively.

Swissceramill Goldline Finishing

Which cutter shapes can be produced?

All tool shapes can be produced which are possible in HM.

  • End mill

  • Torus cutter

  • Half-round cutter

  • Special milling cutter

Swissceramill Goldmaterial

For which materials are the ceramic cutters suitable?

Swissceramill GOLDLINE have been developed for all gold, silver and platinum processing.

  • gold

  • silver

  • Platinum

  • Brass

  • all precious metals

Swissceramill Goldline D3mm

Which sizes can be produced?

Any size can be produced. We recommend the standard size of 6mm, as we can deliver it immediately as a standard.

  • ø1 - ø6mm to order / at least 2 pieces

  • ø1 - ø6mm on customer request, diameter h can be created (e.g. ø1.75)

  • Special shapes can be produced

Swissceramill Goldline Familie

What quantities can be produced?

We can manufacture all quantities for you on request.

  • From 2 pieces only possible with the standard product ø1 - 6mmmm

  • Small quantities and prototypes from 5 pieces possible (after testing with standard)

  • Medium series from 10 pieces possible

  • Large series from 50 pieces possible

Swissceramill Halter

How are the ceramic milling cutters ideally clamped?

The clamping of the ceramic milling cutter can be set up on,

Shrink fit chucks, hydrode chucks, power chucks, powRgrip and precision collets

The clamping of the ceramic milling cutter must not be clamped on,

Weldon chucks and collet chucks

Swissceramill Microtools

Which cutting parameters can be set in "HPC" machining?

Please refer to the recommendation table for the SWISSCERAMILL ceramic milling cutter.

 

If you have any questions, please contact us at info@bsq-tech.com or at +41 763 433 941.

Swissceramill Microtools

Which cutting parameters can be set in "HSC" machining?

Please refer to the recommendation table for the SWISSCERAMILL ceramic milling cutter.

If you have any questions, please contact us at info@bsq-tech.com or at +41 763 433 941.

SEND US YOUR REQUEST.

PHONE BILD.png
MAIL BILD.png