top of page
ADVANCED CERAMICS TECHNOLOGIES

SWISSCERAMILL VIDEOS
CERAMIC END MILL
The Swissceramill ceramic cutters have been developed to achieve higher productivity, higher performance, better surface quality and greater dimensional accuracy.
We process the following materials.
Aluminum, copper, brass, various plastics, gold, silver, platinum and other precious metals.
This technology is new worldwide and it is the first tool with which you can reduce the machining time through the high cutting speeds, feeds and infeeds.
With Swissceramill we achieve an increase in productivity of 400%.
FOR US, EVERY SECOND COUNTS.
It is best to make an appointment and we will support you in increasing your productivity.
1. STANDARD MILLING
![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH | ![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH | ![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH |
---|---|---|
![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH | ![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH | ![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH |
![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH | ![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH | ![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH |
![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH | ![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH | ![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH |
![]() Swissceramill-Goldline-D3mmKeramikfräser von Swissceramill Made by BSQ TECH GmbH | ![]() SwissceramillKeramikfräser von Swissceramill Made by BSQ TECH GmbH | ![]() Swissceramill_SonderformenKeramikfräser von Swissceramill Made by BSQ TECH GmbH |
Milling test with the company TIS - Solution from Germany.
The goal was to carry out basic tests with Swissceramill ceramic cutters.
Engine speed was limited at 15000 rpm.
The company successfully uses Swissceramill in series production.

Play Video
2. FAST-MILLING
Milling test with machine manufacturer Kern Mikrotechnik from Bavaria in Germany.
The goal was to explore the potential of Swissceramill ceramic cutters.
Engine speed was limited at 40000 rpm.
As an expert, Kern Mikrotechnik was itself very surprised by the results, and at the same time new possibilities are opening up for Swissceramill.